Nyhet 2020.

Nu finns möjligheten att ladda elmotorbatterierna via utombordaren!

Pris: 3 929:-

NEW! Range Extender to recharge your Rebelcell 24V50 / 24V100 battery ‘on the go’ via your (outboard) engine and extend your battery range.

Suitable for use with (outboard) engines with 12V alternator with > 17A charge current ( in practice ~ 80HP +  (outboard) engine).

The Range Extender : 1x Rebelcell DC-Charger 29.4V07A (200W), 1x Samlex BS100 Dual battery seperator, 1x cable-set with integrated fuses and connectors *

Benefits

• Optimal charging profile: the RE converts the alternator charge current to the suitable charge profile for your Rebelcel battery for safe charging.
• Starter battery discharge protection: the microprocessor controlled battery seperator ensures that charging of the Rebelcell battery only takes place after the starter battery is full.
• Overcharge protection:  limits charge current automatically when battery is nearly full and shutdown if battery is full.
• Temperature protection: ‘dynamic thermal output control’ feature limits (or stops indien required) the charge current if temperatures are too high.
• Short circuit protection: automatic shutdown with short circuit
• Reverse polarity protection: only on input
• 2 year warranty

* Note: additional cables for connecting the starter battery to the RE are not included. Cable length, thickness and connectors need to be customised to your specific situation. Contact your installation partner for the advise on the correct cables. 

back to overview

Range Extender 29.4V07A

• 
• 
• 

0 Reviews

NEW! Range Extender to recharge your Rebelcell 24V50 / 24V100 battery ‘on the go’ via your (outboard) engine and extend your battery range.

Suitable for use with (outboard) engines with 12V alternator with > 17A charge current ( in practice ~ 80HP +  (outboard) engine).

The Range Extender : 1x Rebelcell DC-Charger 29.4V07A (200W), 1x Samlex BS100 Dual battery seperator, 1x cable-set with integrated fuses and connectors *

Benefits

• Optimal charging profile: the RE converts the alternator charge current to the suitable charge profile for your Rebelcel battery for safe charging.
• Starter battery discharge protection: the microprocessor controlled battery seperator ensures that charging of the Rebelcell battery only takes place after the starter battery is full.
• Overcharge protection:  limits charge current automatically when battery is nearly full and shutdown if battery is full.
• Temperature protection: ‘dynamic thermal output control’ feature limits (or stops indien required) the charge current if temperatures are too high.
• Short circuit protection: automatic shutdown with short circuit
• Reverse polarity protection: only on input
• 2 year warranty

* Note: additional cables for connecting the starter battery to the RE are not included. Cable length, thickness and connectors need to be customised to your specific situation. Contact your installation partner for the advise on the correct cables. 

more

 Limited stock

Quantity

Price€ 349,00

Description

ATTENTION! PLEASE REVIEW THE BELOW INFORMATION BEFORE COMPLETING YOUR ORDER 

• The Range Extender is suitable for use with (outboard) engines that meet the minimum alternator output requirements as indicated before. Consult the manual of your (outboard) engine for this information. Lower than specified charge current from the alternator will lead to de-activation of the DC charger as the battery separator will stop current flow to avoid discharge of the starter battery.
• The Range Extender is therefore not suitable for use with (outboard) engines that use a charging coil instead of an alternator: the capacity is not sufficient to charge both the starter battery and Rebelcell battery.
• Only use the Range Extender with the suitable Rebelcell battery (24V50 / 24V100) ! Using it with a different battery can lead to irreversible damage to your equipement and battery. This damage is explicitly excluded from warranty.
• Consult a certified electrician if you have any questions about installation

Technische parameters	Range Extender 24V AV
Capacity	200W
Galvanic seperation	Yes
Input voltage range (alternator output)	9 – 18V
Output voltage	29.4V
Output Ripple & Noise	<50mV RMS
Peak efficiency	85%
Parallel connection	Yes, max 2
Temperature range	-20° tot +30°C (linear lowering of charge current to 0 at 70°C)
Humidity (non condensing)	Max 95%
Dimensions	176 x 88 x 50 mm
Weight	0.6 kg
Connectors input / output	Non-isolated yellow AMP connector (Quick Connect M 6.3 mm)
Protection
Overcharge / short circuit	Yes, output
Over voltage	Yes, input and output
Reverse polarity protection	Yes, input
High temperature protection	Yes
Input fuse	30A inline (+ cable)
Output fuse	10A inline (+ cable)
Certification
CE	Yes
Automotive	Yes
EMI/EMC	EN50081-1 (EMI), EN50082-1 (EMC) European Automotive Directive 95/54/CE.
Warranty	2 years